about TRIMM CPH
beige - taupe - grey - Graphit
to see the complete
from TRIMM COPENHAGEN
From Denmark to
TRIMM COPENHAGEN was founded by designer Rikke Gjørlund in 2010. The company has maritime roots which is evident in the design and use of materials.
All of our products are produced in Europe to ensure top-quality, short production time and proximity of our workroom.
Our purpose is to increase quality of life and strengthen the relationship between people.
TRIMM COPENHAGEN challenges how people interact and spend time together in an informal setting with focus on creating a lounge atmosphere – outside!
TRIMM COPENHAGEN is a Danish design-driven company that creates lifestyle products like furniture and interior for people who have particularly high demands on quality, comfort, mobility and modern design.
DANISH DESIGN MADE IN EU
TRIMM COPENHAGEN was founded by designer Rikke Gjørlund in 2010. The company has maritime roots which is evident in the design and use of materials. TRIMM CPH creates lifestyle products like furniture and interior for people who have particularly high demands on quality, comfort, mobility and modern design.
For TRIMM COPENHAGEN, the choice of material is absolutely fundamental for product development and identity as a design company. In addition to going for high quality, priority is also given to materials with high durability and the possibility of using the material again and again for new purposes.
In recent years, TRIMM COPENHAGEN has also begun to choose materials that have had a life before or in some other way to have little or no harmful effects on the climate and the environment.
Our outdoor furniture is made from SUNBRELLA PLUS ® which is a performance material, originally designed for boats.
Therefore SUNBRELLA PLUS ® is extremely waterproof, thanks to the acrylic coating on the backside (It is three times more water repellant than any other outdoor materials from Sunbrella). At the same time, SUNBRELLA PLUS ® is breathable, which prevents condensation and moisture. It has maximal resistance against mold because the acrylic coating contains a special fungus-killing mixture of saltwater. SUNBRELLA PLUS ® is also UV resistant and the color fastness is an 8 on a scale from 1-10, where 10 is the best.
The material doesn’t need any other maintenance than simple cleaning. It is very easy to maintain, and most stains can be removed with water and mild soap. For more stubborn stains, bleach can be used, without fear of damaging the fabric or removing the color. One of the best ways to keep the fabric nice is to keep the deep cleaning by maintaining the fabric correctly. This can be done by brushing off the dirt, before it soaks in, and wiping off stains when they happen.
NOTE: When receiving your new outdoor products, you might experience light marks on the fabric surface. This is residue from the back coating of the fabric and is a part of the overall expression of the furniture. It will however fade out and disappear over time and when used regularly.
All products are produced in the EU
GENERAL CLEANING INSTRUCTIONS
First, brush off loose dirt.
Hose down fabric thoroughly. Water should be cold to lukewarm and never more than 100°F/38°C.
Prepare a cleaning solution of water and mild soap (no detergents).
Use a soft bristle brush to clean. Allow cleaning solution to soak into the fabric.
Be sure to rinse thoroughly to remove all soap residue.
Allow Sunbrella to air dry only. Never apply heat to Sunbrella fabrics.
See all Sunbrella cleaning videos HERE
Deep or Stubborn Stain Cleaning
If stubborn stains or mildew persist, you can use a diluted chlorine bleach/soap mixture for spot cleaning of mildew or other similar stains. Protect the area around the Sunbrella fabric when using a bleach solution – bleach may discolor non-Sunbrella fabrics. Always rinse Sunbrella thoroughly in order to completely remove bleach.
HAND WASH: Mix 4 ounces (1/2 cup) chlorine bleach with ¼ cup of mild soap and one gallon of water. Clean with a soft bristle brush. Allow mixture to soak into the fabric for up to 15 minutes. Rinse thoroughly until all soap residue is removed. Allow airing dry. Repeat if necessary.
Name: Sunbrella Plus
Composition: 100% Acrylic
Finish: resin-based anti-fungi coating, water and UV resistant.
Abrasion resistance: No data
Lightfastness outdoor: 4-5
Color fastness UV ISO 105 B02: 7/8
Oil-repellent properties ISO 14419: 5/8
Schmerber ISO811: 1000 mm
Production country: France
Certification: meet EU regulation 2018/1513 not containing PFOA/PFOS